&w=3840&q=75)
&w=3840&q=75)
&w=3840&q=75)
&w=3840&q=75)
&w=3840&q=75)
V Series Tools & Tool Holders
Precision that adapts without slowing the table
Every job asks for something different — a deeper cut, a sharper angle, a firmer crease. The VSeries meets that change through a modular system built to switch tools in seconds, keep accuracy intact, and maintain flow across every sheet.
Tools
A toolset that follows your workflow
The V Series supports cutting, creasing, oscillating, beveling, routing and marking — each tool designed to maintain controlled motion and repeatable detail across materials.
Multipurpose Drawing Tool (MDT)
Mount a fixed pen tool to the head. The tool accommodates a wide range of pens, pencils, and felt-tip markers, making it ideal for drawing and writing on various materials.
Materials
Paper
Cardboard
Textile
...
View detailsWhite 90°-Straight Cut & Kiss-Cut (IHW)
The White 90° performs half-cuts and straight cuts for materials up to 6.3 mm thick and features a pressure roller and Teflon foot.
Materials
Grey chipboard sheets
Luxury packaging board
Varnishing plates
Rubber blankets
Polyester-based varnishing plates
…
View detailsGreen 40° – Bevel Cut (IHG)
The Green 40° tool creates bevel- and V-cuts at a 40° angle, ideal for cutting small shapes up to 2.3 mm thick.
Materials
Standard matboard up to 2.3 mm (6 ply)
Polyester-based varnishing plates
Suede mat board up to 2.3 mm
Archival corrugated board
…
View detailsBlue 45° – Bevel Cut (IHB)
The Blue 45° creates bevel- and V-cuts at a 45° angle, ideal for cutting luxury packaging and rigid boxes up to 5 mm thick.
Materials
Standard matboard
Foamboard up to 5 mm
Grey chipboard up to 5 mm
Luxury packaging board
View detailsPurple – Embossing/Debossing (IHP)
The Embossing Purple tool features 4 tip types and creates elegant embossed or debossed designs on various materials.
Materials
Standard matboard
Coated and laminated paper
Folding cardstock
Braille characters
…
View detailsGrey 90° – Straight Cut (IHG)
The Grey 90° has been developed to perform a straight cut on a wide range of materials up to a thickness of 5 mm (3/16’’). It releases a perfect finishing results on folding and corrugated cardboard, vinyl adhesives, thin plastics and more. It has the same function of the multipurpose tangential knife.
Materials
Universal Straight cutting tool
It comes as standard with a metal and teflon foot
Compatible with VersaTool Holder
View detailsBrown – Creasing/Scoring (IHBr)
The Brown tool features 9 wheels for creasing and scoring various types of cardstock, board, and carton.
Materials
Folding carton
Micro corrugated board
Polypropylene honeycomb
Archival corrugated board
…
View detailsKiss Cut
The Kiss-Cut Tangential Knife accurately peels the top layer of thin materials, with a spring-controlled blade and manual depth control, ideal for applications like vinyl stickers and labels.
Materials
Paper <200 gr
Adhesive vinyl sandblast
Adhesive PVC banner
Protective film
…
View detailsHigh-speed Pneumatic Oscillating knife (HPO)
The High-Speed Oscillating Cutting Tool offers precise, high-speed cutting for various soft materials with an 8 mm stroke and 14,000 BPM.
Materials
Multi-flute corrugated board
Textile and leather
Foamboard
Micro corrugated board
…
View detailsPowerful Pneumatic Oscillating knife (PPO)
The Powerful Pneumatic Oscillating Knife is the perfect tool for cutting heavy materials up to 20 mm thick with an 8 mm stroke and 9.000 BPM.
Materials
Honeycomb board
Foamboard
Coroplast board
Rubber gaskets
…
View detailsMultipurpose Tangential Drag knife (MTD)
The Multipurpose Tangential Knife delivers high-quality, precise cuts at full speed on materials up to 5 mm thick, handling a variety of thin materials.
Materials
Folding carton
Paperboard
Micro-corrugated board
Motorbike decals
Grey chipboard
…
View detailsUniversal Creasing Tool (UCT)
The Universal Creasing Tool features 9 interchangeable wheels for creasing and perforating various materials, with adjustable pressure for clean, precise results.
Materials
Honeycomb board
Foamboard
Coroplast board
Rubber gaskets
…
View detailsMulti-Wall Creasing Tool (MCW)
The Multi-Wall Creasing Tool features 4 multi-flute creasing wheels that are designed to produce fine, clean creases with adjustable pressure.
Materials
Single- and triple-wall corrugated board
Double-wall archival board
Polypropylene honeycomb
…
View detailsPlot Drawing Tool (PDT)
The Plot Drawing Tool allows high-speed labelling of materials like cardstock with text or marks.
Materials
Folding cardstock
Cardstock for apparel patterns
Polycarbonate sheet
Polyester-based varnishing plates
…
View detailsV-Cut & Bevel Tool (VBT)
The V- and Bevel-Cut Tool creates beveled edges and folds on thicker materials of 6 to 16 mm with its adjustable blade angles.
Materials
Honeycomb board
Triple-wall corrugated board
Foam board
Light coroplast
…
View detailsRouting Tool (RT)
The Routing Tool, with its 1kW router, processes rigid media up to 13 mm thick, with a speed range of 5.000-60.000 rpm.
Materials
Aluminum composite
Soft and hardwoods
MDF
Plexiglass
PVC sheets
…
View details
V Series
Tool holders
Invicta - Optima - Integra - Omnia
Multifunctional Tool Head (MTH)
A single head built for adaptability. Switch from one tool to the next in seconds; precision remains unchanged. Fast tool changes with a simple locking system, no calibration required, stable, long-life construction and designed to host a wide range of cutting and creasing tools.
Invicta - Optima - Integra - Omnia
VersaTool Holder (VTH)
One holder. Many possibilities. The VTH accepts all VersaTool components, covering kiss-cuts, straight cuts and V-cuts across carton, adhesive materials and grey board, with instant tool swaps, no recalibration, all in a reliable, expandable, futureproof design
Invicta - Optima - Integra - Omnia
Fixed Tool Holder (FTH)
For marking, writing and drawing. Supports pens, pencils and felttip tools for pattern work and annotation across papers, boards and apparel templates.
