&w=3840&q=75)
&w=3840&q=75)
&w=3840&q=75)
&w=3840&q=75)
&w=3840&q=75)
Support
Software - Firmware
Software
Summa GoProduce Flatbed Edition V3
Version
3.4.3
Date
08-04-2026
Unleash the full potential of your F Series with GoProduce. Summa GoProduce is Windows-based production software that integrates the flatbed into the workflow. It is the perfect link between the design station, RIP station, printers and cutting devices. Once the workflow is set up, macros automate the process. Consequently, the operator's handling before starting the next job is reduced to a minimum, as well as the downtime of the table. Remark: Before downloading/installing the latest GoProduce software make sure to check if your license key of GoProduce is compatible with GoProduce V3. An GoProduce V2 or V1 license key will not work for GoProduce V3. You can purchase “upgrade keys” at your dealer. Please contact your dealer when you are not sure what version your license activation key is for. 10 (Professional - Enterprise)/11 (Professional - Enterprise) 32 bit & 64-bit With the latest updates and Service Pack Discover GoProduce and the GoProduce Pro Pack with a free 30-day trial by registering during setup.
Software
Summa GoSign Tools
Version
1.10.1
Date
27-03-2026
Software bundle for Summa Roll Cutter Series and GoSign. > Plug-in and template for CorelDRAW X5-2025, Illustrator CC-CC 2025 > Supports Inkscape version 1.1.0 or higher > CorelDRAW Automation Support (VSTA,VBA), Macro Manager is required
Software
Summa GoProduce Tools
Version
2.2.3
Date
27-03-2026
Software bundle for the Summa F Series and GoProduce. This software bundle is also used for the Summa L Series and GoProduce Laser Edition. > Plug-in for CorelDRAW X5 - 2025, Illustrator CC and CC 2014-2025 > Supports Inkscape version 1.1.0 or higher > CorelDRAW Automation Support (VSTA, VBA), Macro Manager is required
Firmware
L3214 Firmware, MD9984
Version
3021
Date
25-02-2026
The latest internal programming for the L3214. NOTE: Unit firmware upgrade must only be done by trained personnel (contact your supplier) <strong>WARNING:</strong> Please follow the instructions in the link to proceed with the firmware update. The link is only available to trained personnel.
Firmware
S Class 3 Firmware, MD9987
Version
022
Date
18-02-2026
The latest internal programming for S Class 3 cutters.
Software
Summa GoCare V2
Version
2.3
Date
10-02-2026
Summa GoCare is Windows-based software that allows the L Series to be configured and calibrated. Remark: For Service purposes only. Windows 10 (Professional - Enterprise)/11 (Professional - Enterprise) 64-bit With the latest updates and Service Pack.
Software
Summa GoSign V4
Version
4.0.0
Date
06-02-2026
GoSign V4 is only to be used with Summa S3 (firmware version MD9987 – rev 22 or higher) and Summa S1 (2019 or newer, firmware version MD9986 -rev 20.4 or higher). For other models select “Legacy Vinyl cutters” in the filter settings above (GoSign V3 used for S Class 2 and SummaCut R(L)). Windows 10 (Professional - Enterprise)/11 (Professional - Enterprise) 64-bit With the latest updates and Service Pack GoSign is a Windows-based production tool, acting as a bridge between the design software and a Summa Roll Cutter. It allows you to manage your preferred workflow with great flexibility. Enjoy automated cutting options, custom configuration of action sets, easy plug-ins for design programs and much more. Discover the Pro Pack with a free 30-day trial by registering during setup.
Software
MacSign Plug-In for Adobe Illustrator 2021-26 (macOS)
Version
2.1.6
Date
05-02-2026
MacSign is a collection of plug-ins for Adobe Illustrator that allow you to output jobs directly from Illustrator to a Summa roll cutter for macOS. Follow these steps to install and activate MacSign: 1) Download the plug-in bundle from our website. 2) Start the MacSign installer and follow the on-screen instructions. 3) Register on www.softeamweb.com and confirm your registration. 4) Go back to the home screen and register your MacSign license using your Summa serial number. 5) Use the activation email to activate the plug-in.
Software
Adobe Illustrator CC 2021 – 2025 GoSign Plug-in for macOS
Version
1.2.0
Date
24-11-2025
Plug-in for macOS for Adobe Illustrator CC 2021 - 2026. Adding registration marks generated in Illustrator CC. To be used with Summa GoSign.
Software
Adobe Illustrator CC 2021 – 2026 GoProduce Plug-in for macOS
Version
1.2.0
Date
24-11-2025
Plug-in for macOS for Adobe Illustrator CC 2021 - 2026. Adding registration marks generated in Illustrator CC. To be used with Summa GoProduce or GoProduce Laser Edition.
Software
Summa Axis Control
Version
3.34.0
Date
21-11-2025
Software interface for Summa F Series Pro Flatbed systems, supports Win 7/Win 8/Win10/11
Software
GoData Software v1
Version
1.2.0
Date
21-11-2025
Summa GoData is Windows-based software that provides real-time data monitoring and visualization for the L and F Series. Windows 10 (Professional - Enterprise)/11 (Professional - Enterprise) 64-bit With the latest updates and Service Pack. Remark: Summa GoProduce Flatbed Edition 3.1 or Goproduce Laser Edition 3.0 is required to connect to Summa GoData 1.2.
Software
Summa Cutter Control 5
Version
5.16.0
Date
05-11-2025
Summa Cutter Control 5 is a software interface for adjusting parameters on current Summa Roll cutters, including speed, mode, blade offset and much more. Support Windows OS only (Win 7/8/10/11)
Software
Summa GoProduce Laser Edition V3
Version
3.3.0
Date
06-10-2025
Unleash the full potential of your L Series with GoProduce Laser Edition software. Summa GoProduce Laser Edition is Windows-based production software that integrates the L Series into the workflow. It is the perfect link between the design station, RIP station, printers and cutting devices. Once the workflow is set up, macros automate the process. Consequently, the operator's handling before starting the next job is reduced to a minimum, as well as the downtime of the machine. Windows 10 (Professional - Enterprise)/11 (Professional - Enterprise) 64-bit With the latest updates and Service Pack Discover GoProduce Laser Edition and the GoProduce Laser Edition Pro Pack with a free 30-day trial by registering during setup.
Firmware
F Series Firmware, MD9974
Version
053
Date
29-09-2025
The latest internal programming for F Series Flatbed cutters. Remark: Axis Control 3.27.0 or higher is required to support using USB bulk mode.
Software
Summa GoSign V3
Version
3.3.1
Date
26-09-2025
GoSign V3 is to be used with Summa vinyl cutters SummaCut R(L) (firmware rev039 or higher), S Class 2 (firmware rev024 or higher), S Class 3 (firmware rev010 or higher) and S One (firmware rev005 or higher). Although GoSign 3 will still function with S Class 3 and S One units, we strongly recommend upgrading to GoSign 4 to ensure ongoing compatibility as new firmware updates are released for these devices. Windows 7 (Professional - Enterprise)/8 (Professional - Enterprise)/ 8.1 (Professional - Enterprise)/10 (Professional - Enterprise)/11 (Professional - Enterprise) 32-bit & 64-bit With the latest updates and Service Pack GoSign is a Windows-based production tool, acting as a bridge between the design software and a Summa Roll Cutter. It allows you to manage your preferred workflow with great flexibility. Enjoy automated cutting options, custom configuration of action sets, easy plug-ins for design programs and much more. Discover the Pro Pack with a free 30-day trial by registering during setup.
Firmware
L1810 Gen 2.6 Firmware, MD9988
Version
005 4
Date
03-04-2025
The latest internal programming for L1810 Gen 2.6 cutters.
Firmware
S One Firmware, MD9986
Version
020 4
Date
28-11-2024
The latest internal programming for S One cutters.
Software
Summa GoProduce Flatbed Edition V2
Version
2.6.6
Date
12-08-2024
Unleash the full potential of your F Series with GoProduce. Summa GoProduce is Windows-based production software that integrates the flatbed into the workflow. It is the perfect link between the design station, RIP station, printers and cutting devices. Once the workflow is set up, macros automate the process. Consequently, the operator's handling before starting the next job is reduced to a minimum, as well as the downtime of the table. Remark: There are different versions of Summa GoProduce available. Please contact your dealer when you are not sure what version your license activation key is for. Windows 7 (Professional - Enterprise)/8 (Professional - Enterprise)/ 8.1 (Professional - Enterprise)/10 (Professional - Enterprise)/11 (Professional - Enterprise) 32-bit & 64-bit With the latest updates and Service Pack Discover GoProduce and the GoProduce Pro Pack with a free 30-day trial by registering during setup.
Firmware
S Class 2 Firmware, MD9981
Version
028
Date
25-04-2024
The latest internal programming for S Class 2 cutters.
