Summa GoCare - Version 2.3

Released: February 10, 2026

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

New features

• Added squareness test.

• Option to reset head camera - and XY calibration if calibration values deviate too much from the theoretical values.

• Device "Edit" button under "Devices" tab to setup and configure the device, instead of auto detecting it on each action or test.

• Show lifetime counters for L3214 in the device ribbon.

• Show turn screen around gif at the start of the vision calibration tests.

Improvements

• Pixel calibration now only cuts one row of squares instead of three.

• Hide docker with test sets during a test for more space.

• Added swap buttons in addition to the drag and drop option to change the vision camera order.

• Improved visibility and availability of "Device ribbon" with less flickering.

• Improved instructions.

• Added missing units to the user, service and lifetime settings.

Fixed issues

• Solved: Camera profile remained visible after last mark in the pixel calibration was automatically detected.

• Solved: Poor quality observed in the DIN test of the L1810 due to in-sufficient node.

• Solved: The media area was not reset at the start of the head camera calibration.

• Solved: Unexpected error after cancelling the firmware upgrade.

Summa GoCare - Version 2.2.1

Released: June 12, 2025

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Improvements

• Improved error reporting on received and stitched amount of frames from the vision camera.

Fixed Issues

• Solved: Sometimes there are less stitched frame rows than there have been received from the vision camera, potentially causing errors in the detection and cutting accuracy.

• Vision camera "FrameNumbers" log files don't contain the correct serial number of the individual cameras.

Summa GoCare - Version 2.2.0

Released: November 12, 2024

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

New features

• Added laser alignment test.

• Added reset head camera calibration button.

Improvements

• Added new button images. 

• Automatically enable/disable ribbon actions based on which device is connected. 

• Automatically enable/disable tests based on which device is connected. 

• Moved feed calibration cutting pattern to middle of the machine and feed first tape to the nozzle more accurately

• Link reset and cancel buttons. 

Fixed Issues

• Bad quality of L1810 Gen 2 DIN test.

Summa GoCare - Version 1.4.3

Released: April 10, 2024

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Fixed Issues

• Reading/parsing of L3214 backup is wrong due to different culture settings in the PC.

• Limit virtual camera movement to 1px in pixel calibration of vision camera to make it more accurate.

Summa GoCare - Version 1.4.2

Released: February 5, 2024

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Improvements

• Add proper message to Vision Camera - Calibrate pixels " if no previous tests are done yet and no VisionCamera.xml is created."

Fixed Issues

• Camera view missing on Vision Camera - Calibrate pixels"."

• Vision scans input and output folder not generated/missing causing an error in Vision Camera - Calibrate pixels"."

Summa GoCare - Version 1.4.0

Released: December 13, 2023

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Improvements

• Add Beckhoff license file when doing a L3214 backup in "TECHNICIAN" mode.

• Bypass pressing next after verifying PLC has restarted automatically by detecting the current state. 

• Change plc to PLC in translations.

• Remove ip address user input and permanently set 10.137.1.110 for firmware upgrade of a L3214.

Fixed Issues

• Issue Fix: L3214 device backup is adding an ads error to the log file even though the backup is working properly.

Summa GoCare - Version 1.3.2

Released: August 4, 2023

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Fixed Issues

• Edit service settings display and entry for L3214 devices are only up to 2 decimal places and is rounded. This will save inaccurate data.

Summa GoCare - Version 1.3.1

Released: July 11, 2023

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Fixed Issues

• Backup of L3214 register is wrong due to decimal written as comma.

Summa GoCare - Version 1.3.0

Released: May 24, 2023

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

New features

• Ribbon button added to edit service settings.

• Added USB driver for the vision camera and IC Capture 2.4 to the installer.

Improvements

• Added extra step in pixel calibration to verify calibration.

• Extra step added to mechanical adjustment to put camera's perfectly perpendicular to the conveyor with a plump bob.

• Extra window added to place paper on the machine during din test or circle test.

• Message changed in calibrate pixels to "Stick 2 layers of tape".

• Support CCT format for serial numbers.

• Set number of passes in material manager default on 2.

• Default minimum power set to 10%.

• Window added to mechanical adjustment for levelling the cameras.

Fixed Issues

• When redo the pixel calibration, the scanned image is black.

Summa GoCare - Version 1.2.0

Released: September 7, 2022

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

New features

• Backup to Azure storage.

Improvements

• Change message in pixel calibration to "Feed center of last applied tape to the cutter head".

• Reduced height for drawing paper positions to make it easier to remove the tape.

• Update drawing paper positions in mechanical alignment test for the camera alignment test.

• Do not talk about 'Azure', instead use 'Summa cloud storage".

• Show proper message when no internet connection is available on backup to or restore from the Summa cloud storage.

• Remove “Check and report” in user mode.

• Remove “new action set” in the documents folder.

• Remove event logger in user mode.

• Remove material manager in user mode.

• Remove tool settings in user mode.

• Change default name of backup of device and vision to local the same as cloud backup filename.

• Remove image of laser tool in tool properties similar to GoProduce LE.

• Firmware upgrade done message changed to “ Wait until upgrade is complete to reboot device and press finish.”.

• Update default test sets for service and factory mode.

• Cloud backup/restore improvements:

• Filename of factory backup: add “-Factory.xml”

• Filename of user backup: add "-YYYY-MM-DD.xml"

• Show drop down box on restore to select proper backup

• What if no backup exists? Show proper message.

• Sending files larger then 10kB failed for example the DIN test.

• Check for valid serial number in the machine LXXXXX-XXXX before running a test.

• When loading the tape, use a scan feed instead of a normal feed. Makes the trigger error pop up faster.

• Switch "Head Camera - Set camera focus" and "Head Camera - Calibrate" order.

• Add vision camera backup action to user mode.

• Rename "Move files to GPLE" to "Update GPLE".

• Change description in "Vision Camera - Set camera order" and "Vision Camera - Set camera focus".

• Add browse folder button to action property Directory.

• Add extra offset to the vertical alignment in vision camera alignment (100px).

• Change "Move files to GPLE" category to "Vision camera".

• Rename "Move files to directory" to "Backup" with "Vision camera" as category.

• Add calibration sheet for head camera focus.

• Add test files as last step.

• Add MDxxxx number and version number to boot folder for the L3214.

• Improvements to avoid backlash.

• Add driver installers to installation.

• Avoid having to confirm each mark manually in pixel calibration.

• Upgrade file of the L3214 will be published as ZIP archive.

Fixed Issues

• Calibrate head camera focus, detection not successfully done.

• After feeding wait for response not working because the air pressure of the nozzle is switching.

• Feed issue when press the buttons in the mechanical alignment and pixel calibration.

• Path not exist in circle and din test action

• Calibrate pixels squares on the left not cut successfully (Bed size changed 1850 to 1820).

• Actions sets remain disabled after pressing finish when upgrade is done.